OPERATION MANUAL AND INSTRUCTIONS
ISTRUZIONI PER L'USO
The instrument panel has been designed to make all the functions, gauges and symbol keys easy to understand at a glance:
1 – Pressure gauge: used to check pressure in car system.
2 – key
: used to scroll up station functions and set time and oil qualities.
3 – key
: used to scroll down station functions and set time and oil qualities.
4 – key
: used to confirm set functions.
5 – key
: used to interrupt any operation.
6 – Backlit graphic display: shows station functions.
7 – Solvent container: contains solvent for cleaning system.
8 – Fresh oil sight glass: shows colour of injected fresh oil.
9 – Old oil sight glass: shows colour of recycled old oil.
GENERAL FUNCTIONS OF CLEANING STATION
BRIEF DESCRIPTION OF WORK CYCLES
When the display is turned on, the AUTOMATIC TRANSMISSION function will be automatically selected, thereby allowing the
following steps to be performed:
- Feeding solvent
- Cleaning
- Emptying oil sump
- Changing converter oil
- Filling up oil
Scrolling down from AUTOMATIC TRANSMISSION using the
allowing the following steps to be performed:
- Feeding solvent
- Cleaning
- Changing converter oil
- Filling up oil
Further scrolling down from AUTOMATIC TRANSMISSION using the
functions as SETUP and INFO.
Automatic transmission.
- Step 1: Feeding solvent into automatic transmission system.
- Step 2: System cleaning cycle with solvent and old oil.
- Step 3: Emptying old oil out of sump to change oil and replace filter and sump gasket.
- Step 4: Feeding fresh oil into sump.
- Step 5: Changing old oil in converter by feeding fresh oil.
- Step 6: Checking oil level in sump
DSG – AISIN transmission
- Step 1: Feeding solvent into automatic transmission system.
- Step 2: System cleaning cycle with solvent and old oil.
- Step 3: Changing old oil in converter by feeding fresh oil.
- Step 4: Checking oil level.
18
key will cause the station to select the DSG function, thereby
key will cause the station to select such special
EN
I