Technical Data - EINHELL RT-TS 1221 Mode D'emploi D'origine

Anleitung_RT-TS 1221_SPK1:_
GB
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Important notes
Please read this manual carefully and pay attention
to the information provided. Use this manual to
familiarize yourself with the machine, its correct use
and safety regulations.
Safety regulations
The corresponding safety information can be found
in the enclosed booklet.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
Sound and vibration
Sound and vibration values were measured in
accordance with EN 61029.
L sound pressure level
pA
K uncertainty
pA
L sound power level
WA
K uncertainty
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Keep the noise emissions and vibrations to a
minimum.
Only use appliances which are in perfect working
order.
Service and clean the appliance regularly.
Adapt your working style to suit the appliance.
Do not overload the appliance.
Have the appliance serviced whenever
necessary.
Switch the appliance off when it is not in use.
16
06.12.2010 8:45 Uhr Seite 16
Warning! The equipment generates an
electromagnetic field during operation. In some
circumstances this field may impede active or passive
medical implants. To reduce the risk of serious or
fatal injury, we recommend persons with medical
implants to consult their doctor and the manufacturer
of the medical implant prior to using the equipment.

5. Technical data

Voltage
Power rating
Idle speed n 0
Carbide saw blade
Number of teeth
Table size
Table size with width extension
Max. table size with width extension 525 x 620 mm
Cutting height max.90°
Cutting height max.45°
Connector for dust extractor
Safety insulated
Weight
Thickness of the splitter
6. Before putting the machine into
93,9 dB(A)
operation
3 dB
106,8 dB(A)
Make sure the machine stands securely, i.e. bolt
it to a workbench or solid base.
3 dB
All the covers and safety devices have to be
properly fitted before the machine is switched on.
It must be possible for the saw blade to run
freely.
When working with wood that has been
processed before, watch out for foreign bodies
such as nails or screws etc.
Before you actuate the On/Off switch, make sure
that the saw blade is correctly fitted and that the
machine's moving parts run smoothly.
Before you connect the machine to the power
supply, make sure the data on the rating plate is
the same as that for your mains.
230 V ~ 50 Hz
1200 W
4500 rpm
Ø 210 x Ø 30 x 2.5 mm
20
525 x 400 mm
525 x 470 mm
45 mm
41 mm
dia. 36 mm
II / ®
15.7 kg
2 mm