Installation; Adjustments To The Product - Brandy Best CVE50IX Notice D'emploi

Installation

This appliance must be installed by a competent and qualified installer, following regulations in place at the
time of the installation.
Modifications to domestic electrical circuits may prove to be necessary for the installation of this appliance,
and must be carried out by competent individuals. It is extremely dangerous to modify, or attempt to modify
the technical specifications of this appliance. These specifications can be found on a sticker on the rear of
your oven.
Your appliance must be installed in a manner which leaves gaps of 7cm behind and 5cm to each side, and a
gap of approximately 65cm above the hob.
Position the appliance on a stable surface, completely level and far from combustible objects. Ensure
that air can circulate freely around your appliance.

Adjustments to the product

Position the appliance on a stable surface, completely level and far from combustible objects. Ensure that
air can circulate freely around your appliance.
The adjustable stands located at the four corners of the base of the oven can be used to adjust the height
and stability of the appliance.
CAUTION: This appliance must be positioned directly on the floor.
IMPORTANT: Your appliance must be installed in a sufficiently ventilated location, in accordance with
regulations in place at the time of the installation.
Page 7