Every Month (Or 100 Hours) - Husqvarna HTC 270 EG Manuel De L'opérateur

Maintenance and repairs
5. Check the belt tension by turning the belt according to Figure 5-2, page 32. It
should be possible to turn the belt approximately 1/10 of a turn by hand.
Figure 5-2. Checking belt tension
Note!
The belt is a consumable part. Its lifetime can vary depending on the operating
conditions.
5.5

Every month (or 100 hours)

• Check that all screws and joints are tightened and correctly attached.
• Check that the grinding cover is whole and undamaged.
• Scrape and vacuum-clean the parts shielded by the grinding cover.
• Test run and listen for any dissonance from the bearings.
32
HTC 270 EG
2.0