C = Temperature Unit Of Measurement Selection; How To Quit And Save The Settings - Piron MARCO POLO PF1004 Mode D'emploi

C. = Start postponed.
Factory parameters = °C
This command allows you to postpone the start of a cooking or washing program
23 hours and 59 minutes
Touch the P/M key to select 1 or 0:
C. 1 = START POSTPONED function ENABLED.
+ –
or
Touch key
time+1min." and a maximum value, i.e. the "current time+23 h and 59min.".
NOTE. Warm-up is inhibited, by mutual exclusion. ( PRH = 0)
C. 0 = START POSTPONED function DISABLED.
NOTE. C.1 is displayed (Zone D) during the waiting period.
+ –
Press key or
Start Postponed disabling
Press key P/M and keep it pressed until the previously selected cooking parameters appear on the
display.
You will now be able to change the cooking parameters, or turn the oven on or off.
t. = current time adjustment
Purpose; allows you to adjust the current time displayed by the system. This operation is recommended
when the oven is installed.
+ –
Touch key or
U. °C = Temperature unit of measurement selection
Purpose; allows you to display the temperature in the cooking chamber and core probe in either
or degrees
degrees Celsius
Touch the P/M key to select °C or °F:
U. °C = Celsius.
U. °F = Fahrenheit.

HOW TO QUIT AND SAVE THE SETTINGS

Press the "MEMORY" key.
The "MEMORY" indicator light will come on for a brief instant in red and there will be a double acoustic
signal.
(Zone A) to enter the required setting, between a minimum value, i.e. the "current
(Zone D ) to check the time at which the oven will switch on.
of the TIMER sector (Zone A) to enter the current time.
Fahrenheit .
E n g l i s h | 55
for up to