CEMB SM675TI Manuel D'utilisation page 41

- Start wheel rotation (pedal ) and at the same time raise the disc by tapping
on (control ). Rotate until the tyre is completely demounted (D Fig. 30).
9.5.f. Demounting complete
EN
- At the end of the demounting phase, act on the commutator switch placed
on the TPH console (17 Fig.9) in order to obtain the withdrawal of the bead lifter tool till
its resting position.
- Then tilt back the vertical post and remove the tyre (fig.31).
31
User's manual 41