SOLAC PV2000 Mode D'emploi page 12

• Plug in the iron and set the temperature selector Fig.1 (6) to the desired
position. The pilot light Fig.1 (7) will go off when that temperature is
reached.
SPRAY
• Spray can be obtained by pressing the respective button Fig.1 (4), dry or
with steam. The temperature level does not matter.
• Press the spray button Fig.1 (4) as many times as you like to use this func-
tion.
• Do not use the spray on silk garments, since the drops of water can leave
marks.
STORAGE AND CLEANING:
• Unplug the iron and empty the water from the tank. Turn the steam adjust-
ment control Fig.1 (5) to the self-cleaning position Fig.6 and remove the
needle together with the steam adjustment control.
• To clean the needle, use a cloth moistened with vinegar and then rinse it
with tap-water.
• We recommend cleaning the soleplate or removing residue stuck to it with
a piece of wet cotton wool or non-abrasive products.
TIPS FOR DISPOSING OF THE USED APPLIANCE:
• Prior to the disposal of your used appliance, you must make sure that it is
clearly non-functional, and that it is disposed of in accordance with the
national laws in force. Ask your Distributor, Town Council or Local Authority
for detailed information in this respect.
GUARANTEE CONDITIONS
• Solac is not liable for the failures of your appliance in the case of breach of
the specifications of the Guarantee Conditions or if the operation and main-
tenance instructions, which have been included in the instructions brochure
for each appliance, are not properly followed.
• The Guarantee conditions can be found in the attached booklet World-wide
Guarantee.
• Remember that the damages caused by the effect of scale are not covered
in the Guarantee.
12