SOUNDMASTER BCD 250 Mode D'emploi page 12

REVERSE/FORWARD
i. The ►│ / MIN or │◄ / HOUR BUTTON can be used to jump to a different track number or to scan disc
tracks at high speed.
ii. Press the │◄ / HOUR once to hear the beginning of the current track. Press it two or more times to hear
previous tracks on the disc.
iii. Press the ►│ / MIN to hear the next track on the disc.
iv. Press and hold the │◄ / HOUR Button, the current track will be scanned and move backwards to the
previous track(s); When the desired track section is found, release the button and normal play will resume.
v. Press and hold the ►│ / MIN BUTTON, the current track will be scanned and move forward to the next
track(s); When the desired track section is found, release the selected button and normal play will resume.
REPEAT FUNCTION
The CD REPEAT Button may be used to repeat a single track or repeat all tracks on a compact disc.
1. Press the REP BUTTON once during playback, the
The same track will be repeated over and over.
2. Press the REP BUTTON a second time to repeat all tracks. The icon will
display, but will not flash this time.
3. To cancel REPEAT PLAY, Press the REP BUTTON repeatedly until the icon
PROGRAM FUNCTION
The Program feature can be used to program up to 20 tracks to play in a selected order.
1. While in the stop mode only (CD is not playing), press the PROG/MEM Button, LCD Display will show the
wording "PROG 01" and "PROG 01" starts to flash.
2. Press the ►│ / MIN BUTTON or │◄ / HOUR BUTTON to allocate the desired track.
3. Press the PROG / MEM Button to select and store the track into memory.
4. Repeat step 2 to 3 to select up to 20 tracks.
5. To play the selected tracks (in the program mode); press the PLAY/PAUSE/M- BUTTON. The track number
and the "PROG" appear on LCD Display.
6. Press the │◄ / HOUR BUTTON to hear the previous or press the ►│ / MIN BUTTON to hear next program
track.
Note: After all of the programmed tracks have played, the CD player will return to the stop mode.
7.
To clear the programmed tracks from memory, press STOP two times.
SLEEP FUNCTON
1. Press the FUNCTION / C.ADJ BUTTON to the desired source.
2. Tune in the desired radio station or CD play and adjust the volume control.
3. Press the SLEEP BUTTON. The "90" will appear on the clock display.
4. Repeatedly press the SLEEP BUTTON for desired sleep time between 10-90 minutes.
5. The unit will automatically switch off when the SLEEP time expires.
SNOOZE FUNCTION
If you want to snooze a few more minutes press the SNOOZE BUTTON will deactivate the sound for approximately 9
minutes.
Copyright by Woerlein GmbH, 90556 Cadolzburg,
Changes of technical specifications without further notice
ENGLISH
icon will
www.woerlein.com
show on LCD Display and flash.
show on
disappeared.
the LCD
11