Storage; Handling, Transport And Storage Of Grinding Wheels; Guarantee; Possible Faults - ATIKA KSG 220 A Notice Originale

Cleaning

Clean the machine and its accessories thouroughly after
each application so that the faultless function is kept.
 Clean and oil all moving parts regularly (except for the drive
system).

Never use any grease!

Use environmentally acceptable spray oil.
 Remove dust and dirt with a cloth or a brush.
 Clean the vent slots of the motor after each use.
 Clean the machine only dry.
 Do not use solvents for the synthetic parts (petrol, alcohol,
etc.) as these can damage the synthetic parts.

Storage

Before each storage
 allow the device to cool down
 pull out main plug
 Store unused equipment in a dry, locked place out of the
reach of children.
 Before extended storage, please observe the following to
increase the service life of the device and to ensure smooth
operation:
 thoroughly clean the device

Possible faults

Before each fault clearance
 switch off device
 wait for the shutdown of the grinding wheel
 allow the device to cool down.
 pull out main plug

After each fault clearance, put into operation and recheck all security installations.
Fault
Chain sharpener does not
operate.
Chain sharpener grinds with
interruptions
Grinding wheel becomes hot
Motor is humming, grinding
wheel stops
Unusual vibrations
In case of further faults or inquiries please contact your local dealer.
Possible cause
 no power
 Extension cable defect
 Main plug, motor or switch defect
 Extension cable defect
 Internal fault.
 ON/OFF button defective.
 Grinding wheel is dull or defective
 Grinding wheel is blocked
 Grinding wheel is defective
 Abrasive disc is mounted incorrectly
Handling, transport and storage of grinding
wheels
Grinding wheels are fragile and sensitive to shocks and
impacts.
Hence, mind the following points:
 Prevent the grinding wheel from falling and protect it against
sudden impacts.
 Do not use fallen or damaged wheels.
 Avoid vibration during the work.
 Avoid damages on the locating bore.
 Avoid any loading of the abrasive surface.
 Store the grinding wheels horizontally or vertically in a dry
frost-free place at a constant moderate temperature.
 Protect the abrasive discs against direct sunlight.
 Store the grinding wheels in their original packaging or in
special containers and shelves.

Guarantee

Please observe the enclosed terms of guarantee.
Remedy
 Check power supply, power socket and fuse
protection
 Check extension cable, exchange defect cable
immediately
 Have motor or switch checked by an approved
electrician or replaced by original spare parts
 Check extension cable, exchange defect cable
immediately
 Please contact the after sales service.
 Please contact the after sales service.
 Replace grinding wheel
 Remove object
 Replace grinding wheel
 Mount the abrasive disc correctly
17