Be Sure To Keep For Safety - Zanussi ZRS9600FA Notice D'emploi

Be sure to keep for safety!

Read these safety instructions thoroughly and
carefully before using. Please keep this user guide
to hand for future reference.
DO NOT remove or disassemble!
Be sure to unplug from receptacle (outlet/
mains)!
Caution!
• If the supply cord is damaged, it must be
replaced by the manufacturer or its service agent
or a similarly qualifi ed person in order to avoid
a hazard.
• The appliance must be positioned so that the
plug is accessible.
Never let the power cord be crushed
by the refrigerator itself or other
(heavy) objects.
Never bend power cord excessively.
If the cord is damaged or peeled, it can be a
cause of fi re and electric shock.
Never hold the power cord or plug
with wet hands.
There is a risk of electric shock.
Be sure to ground. Check if your wall
outlet is grounded (earthed).
There is a risk of electric shock hazards.
Let the cord from the plug outlet be
directed Downwards.
If it is directed up, the cord near the plug is
bent and can be damaged, which can cause
an electric shock or fi re.
Never let the power cord touch or
pass over heating appliances.
Power cord can be damaged, resulting in a
risk of electric shock hazards.
26
Warning! Indicates the possibility of danger of
death or serious injury.
Caution! Indicates the possibility of risk of
personal injury or material damage.
Other Signs
NO., DO NOT...
Be sure to keep and follow!
Warning
Do not plug several appliances into
the same wall outlet (receptacle).
It can be a cause of overheating and/or fi re.
Use an exclusive grounding receptacle for
the refrigerator.
Never use a damaged power cord or
plug, or loose main socket.
There is a risk of fi re, electric shock or
serious injury.
Never unplug by pulling only the
power cord wire. Always grip the
plug fi rmly.
Do not install the refrigerator on a
wet fl oor or in a place with much
humidity moisture.
Electric insulation gets weakened, resulting
in a risk of electric shock hazards.
Check if plug is loose from the wall
outlet.
Electric insulation gets weakened, resulting
in a risk of electric shock hazards.