Kripsol Koral KSE Guide De L'utilisateur page 4

• •
• WARNING – Disconnect the pump from the main power supply completely before
servicing the pump or filter.
• WARNING – All electrical connections must be done by a qualified electrician
according to local electrical standard.
F NF C 15-100
D DIN VDE 0100-702
A ÖVE 8001-4-702
E UNE 20460-7-702 1993, REBT ITC-BT-31 2002
IRL IS HD 384-7-702
I CEI 64-8/7
LUX 384-7.702 S2
NL NEN 1010-7-702
P RSIUEE
• WARNING – Be certain the machine is only connected into a protected outlet that is
protected from short-circuits. The pump is to be supplied by an isolating transformer
or supplied through a residual current device (RCD) having a rated residual operating
current not exceeding 30 mA.
• WARNING – Children should be supervised to ensure that they do not play with
the appliance. Keep fingers and foreign objects away from openings and moving
parts.
• WARNING – Motor must be suitably grounded. Connect ground wire to green
grounding screw and for cord connected units use properly grounded outlet.
• WARNING – Use a motor bonding lug to connect motor with other bonded parts
using the appropriate size conductor as required by electrical codes.
• WARNING – When making these electrical connections, refer to the diagram given
under the lid of the motor terminal box. Be sure to check the electric connections
are tight and sealed before powering up. Replace all covers before operation.
• WARNING – Make sure that the power supply voltage required by the motor
corresponds to that of the distribution network and that the power supply cables
matches the power and current of the pump.
USE ONLY KRIPSOL GENUINE REPLACEMENT PARTS
Page 2 of 6
WARNING: Electrical Hazard. Failure to follow
instructions can result in serious injury or death.
FOR USE WITH SWIMMING POOLS
GB BS7671:1992
EW EVHS-HD 384-7-702
H MSZ 2364-702:1994 / MSZ 10-533 1/1990
M MSA HD 384-7-702.S2
PL PN-IEC 60364-7-702:1999
CZ CSN 33 2000 7-702
SK STN 33 2000-7-702
SLO SIST HD 384-7-702.S2
TR TS IEC 60364-7-702
Pump Rev. I