Kratki UMBRELLA Instructions D'installation Et D'utilisation page 46

EN
Fig. 7. Connection diagram for the manual gas control system
CONNECTION TO THE GAS SOURCE (GAS BOTTLES/CYLINDERS)
ATTENTION: To connect the appliance to the gas cylinder customer has to buy and connect at
least 60 cm CE and GAR approved flexible hose with forged connectors, flexible hose with steel
mesh braid or flexible steel hose.
The gas supply connection is placed in side the chamber and it is standard R 1/2" screw connec-
tion with external thread for standard hose connection.
The choose of the regulator shall be made in accordance with the specification note in the table
on page 7 or on a rating label.
ATTENTION: Picking up the wrong pressure while choosing the regulator may lead to incorrect
combustion, smoking or even may cause health problems. Never connect the wrong pressure
regulator for connection of the appliance to the gas supply than the one stated in table on page
7 or on your appliance's rating label.
46