Publicité
Les langues disponibles
Les langues disponibles
EN
INSTALLATION RULES
Installation should be carried out in accordance with the requirements of the law in force in the given
country or region. In the absence of such provisions, the rules contained in this manual and the princi-
ples of fire safety should be followed.
This appliance has been tested for quality and safety and has been certified by a notified testing laboratory.
WARNING
The UMBRELLA gas garden heater is adapted to work with a cylinder or a household tank of a
propane-butane gas mixture. The flexible connection pipe should be intended for LPG from the
cylinder.
The device is sold with complete automation and cables connecting the main burner and pilot
burner with the valve controller. Do not use replacement system components other than those
installed or supplied by the manufacturer.
ASSEMBLY OF THE APPLIANCE
The device should be assembled according to the diagram below. Skipping any step during instal-
lation may result in damage to the device during operation, and even the occurrence of dangerous
situations that threaten the health of the users of the device.
UMBRELLA VERSION
Step 1. The Base of the burner (2) shall be installed with the logo of Kratki.pl in the same direction as
the hole in the base of the body (1). Then screw in the angles (13) with both burner base and body
base as per the drawing below.
Set the grille
logo in the
direction of the
notch in the
bottom base
34
Bottom bracket (13)
with base (1) and oval
base (2) with one M5
cone screw as shown.
Hexagon socket head
26
12
screws
13
4
Bottom angle
2
1
Palmica base, set
1
1
Base
Position
Number
Name
Publicité
