Fitting Circuitry - Festo DMES−18 Notice D'utilisation

DMES−...
If you are using inductive proximity switches
Use switching lugs, sensor supports and proximity switches in accordance with
S
the chapter Accessories".
Use hammer−head screws for fastening
S
the sensor supports in the groove.
The hammer−head screws require the re
cess in the cover as a guide channel. You
can bring the hammer−head screw into the
holding position by turning it 90°.
Avoiding dirt
Use cover rails (groove covers) in all unused grooves in accordance with the
S
chapter Accessories".

Fitting circuitry

Use the DMES−... only in conjunction with
S
a separately switched emergency stop
mechanism.
1 Emergency stop circuit
2 Controller (PLC/IPC)
3 Emergency stop switching unit
Festo DMES−... 0609b English
Fig. 25
1
PLC
3
Fig. 26
2
M
+
_
31