Publicité
Les langues disponibles
Les langues disponibles
Model DVC863L
(Powder filter (for dry dust) model)
► 1. Tank cover 2. Powder filter (HEPA) 3. Damper
4. Prefilter 5. Tank
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
CAUTION:
Always wear dust mask during
assembly or maintenance.
Installing the powder filter (HEPA)
and prefilter (for dry dust)
Optional accessory for cloth filter model
CAUTION:
Never pick up water or other liq-
uids or wet dusts when using the powder filter.
Picking up such things may cause the powder filter
breakage.
To use powder filter:
1.
bolts.
1
2
3
4
► 1. Float 2. Float cage
2.
5
mounting position markings.
3.
place them in the prefilter with aligning the mounting
position markings.
4.
► 1. Tank cover 2. Powder filter (HEPA) 3. Damper
NOTICE:
sure that prefilter and damper are always used
together. It is not allowed to install powder filter
solely.
8 ENGLISH
Remove the float cage and float by removing the
1
Place the prefilter in the tank with aligning the
Mount the damper on the powder filter and then
Finally, mount the tank cover and lock it.
6
6
6
4. Prefilter 5. Tank 6. Mounting position marking
Before using the powder filter, make
2
1
2
3
4
5
Publicité
