Publicité
Les langues disponibles
Les langues disponibles
4060410000_WaveAnalog.qxd:4060410000_WaveAnalog
4.
Mounting
The analogue signal isolators are mounted on standard TS 35 rails.
5.
Electrical connection
Terminal assignments
1 Input +I
2 Input +U
3 Input –
4 Power supply +24 Vdc (cross connected)
5 Power supply 0 V (cross connected)
6 no connection
7 Output +U/I
8 Output –I
9 Output –U
10 Power supply + 24 Vdc (cross connected)
11 Power supply 0 V (cross connected)
12 no connection
Wire cross-section max. 2.5 mm
Multi-wire connection max. 1 mm
(two wires with same cross-section)
Warning! For applications with high isolation voltages, take measures to
prevent accidental contact and make sure that there is sufficient
distance or insulation between adjacent devices!
5.1 Technical Data
Supply voltage
Surrounding air temperature
Voltage supply via cross-connections
Operating carrying capacity of cross connection
(see Cat. No. point 7)
2
2
18 ... 30 Vdc/approx. 1.5 W
0 °C ... +55 °C
2 A
06.07.2010
11
Publicité
