EN
Translation of the original operating instructions
JUNIO-STRIPPER 230 V
Dear Customer
You have chosen to purchase the JUNIO STRIPPER
the right choice when it comes to quality and perfor-
mance.
This operating manual contains important instructions
for operating the machine.
Attention!
Please read this operating manual carefully, and
ensure that all users read this manual before
operating the machine.
Observing the safety instructions protects against
situations that may endanger health and safety
and helps to prevent improper use of the machine.
Ensure that you are confi dent operating the machine
before commencing work. During operation is too late!
Do not allow persons to operate the machine if they do
not possess the necessary expertise to do so.
Legend
Important instructions relating to safety and damage
prevention are indicated in this operating manual by
the following symbols.
Important instructions
Warning
Warning of general danger
Wear safety glasses
Wear hearing protection
Read the instructions/notices
Special waste
Wolff GmbH & Co KG | D-74360 Ilsfeld | Ungerhalde 1 | Fon: +49 (0)7062-91556-0 | Fax: +49 (0)7062-91556-41 |
12
1.0 Product description
Important components of the machine
The numbering of the product features refers to the illust-
ration of the machine on the graphics page 2.
A
1 Motor
2 Striker Foot Casting
3 Handle
4 Knife
5 Switch
Functional description
Please refer to the graphics on pages 2-3 while you
read the operating instructions.
Restriction of use
The JUNIO-STRIPPER is exclusively for removing bonded
fl oor coverings in dry environments.
It should not be used for any other purpose. Wolff GmbH &
Co.KG cannot be held responsible for any damage or loss
caused by incorrect use.
www.wolff -tools.de