Media Playback - Grandin LD32CVB16 Manuel D'utilisation

Menu Operation

Media playback

• First, insert a USB memory device into the USB port.
• Press the SOURCE button to call up the signal source selection menu. Use the ▲/▼
to highlight MEDIA, and the press ENTER button to access the MEDIA mode.
(Alternatively, Press the DMP button on the remote control to enter the MEDIA mode)
• You may also use the signal source selection menu to exit from the MEDIA mode.
NOTE:
Special USB device may be not or well supported.

USB max. Load: DC5V 500mA.

In terms of loading capacity, it cannot support all models of mobile hard disk. It is

recommended to use low-power mobile hard disk of no more than 500mA current.
For large file sizes and large capacity storage devices, the loading speed may be

longer. The recognition speed of a USB storage device may vary depending on the
device.
The formats supported
Media File Ext.
.mpg
.avi
.ts
Movie
.mkv/
.mov
.Mp4
.vob
.mp3
.wma
Music
.m4a/
.aac
.jpg/
.jpeg
Photo .bmp
.png
Codec
Video
MPEG-1, MPEG-e
Xvid, MJPEG, MPEG-4
SP/ASP, H.264
MPEG-2, H.264
MPEG-4 SP/ASP, H.264
MPEG-4 SP/ASP, H.264
MPEG-1, MPEG-2
MPEG-2
--
--
--
Progressive JPEG
Baseline JPEG
Non-Interlaced
Interlaced
Audio
MP3, WMA, AAC,
AC3
MP3
WMA*
AAC
BMP
27
Remark
Max Resolution:1920×1080
Max Data Rate:20 Mbps
Max Solution:1920x1080
Max Data Rate:40 Mbps
Sample Rate:8K-48KHz
Bit Rate:32K-320Kbps
Sample Rate:16K-48KHz
Bit Rate:32K-442Kbps
Channel: Mono/Stereo
Max Resolution:1024×768
Max Resolution:8192x8192
Max Resolution:6500x6500
Pixel Depth:1/4/8/16/24/32
Max Resolution:3000x3000
Max Resolution:1500x1500