Basic Operation
Channel Selection
/
• Using the
Press CH+/∧ to increase channel number.
Press CH-/ ∨ to decrease channel number.
• Using 0- 9 digital buttons.
You can select the channel number by pressing 0 to 9. (In ATV, DTV mode)
• Example
To select a one-digit channel (e.g. Channel 5): Press 5.
To select a two-digit channel (e.g. Channel 20): Press 2 and 0 in a short time.
Volume adjustment
■ Press the + / - on the panel of TV or VOL+/VOL- on the remote control to adjust the
volume.
• If you want to switch the sound OFF, press the
• You can release mute by pressing the
Information display
• Press the INFO button on the remote control to display information about the current
program.
Selecting an input source
You can select the input source by pressing the SOURCE button on the remote control.
Press the▲/▼buttons to cycle through the input sources, and press the ENTER button
to confirm your choice.
on the panel of TV or CH+/CH- on the remote control.
.
again or by increasing the volume.
Enter
15