Basic Operation; Quick Setup; Turning On And Off The Tv - Grandin LD32CVB16 Manuel D'utilisation

Basic Operation

Turning on and off the TV

• Turn on the TV
Connect the TV set to the mains. To switch on the TV from standby mode, you must
press the button on the remote control.
• Turn off the TV
Press the button on the remote control to enter standby mode. To power down the
TV completely, unplug the power cord from the mains socket.
Do not leave your set in standby mode for long periods of time. If you will not use the
TV for a long time, it is recommended to unplug the set from the mains and aerial.
• No signal
The message "No Signal" appears on screen when there is no input signal. In PC
mode, the TV set will turn off automatically if there has been no signal for 5 minute.
In other mode, the TV set will turn off automatically if there has been no signal for 15
minutes.

Quick Setup

When the TV is initially powered on, a sequence of on-screen prompts will assist in
configuring basic settings.
NOTE: Make sure that the antenna or cable TV system connection is made.
Quick setup
Language
Enter
Step one:
OSD Language: User the◄/►buttons to select the OSD (On Screen Display) language
and then press the ENTER button to go to the next step.
Step two:
Country: User the◄/►buttons to select the country you are living in and then use the
ENTER button to go to the next step. Press MENU button to go to previous step.
Quick setup
Country
Enter
Step three:
Location: User the◄/►buttons to select the TV Type: Home or Store.
And then press the ENTER button to go to the next step. Press MENU button to go to
previous step.
English
Exit Return
France
Exit Return
13