Grandin LD32CVB16 Manuel D'utilisation page 65

Menu Operation
• Auto Power Down
Select the time after which the TV will automatically switch to standby mode.
The TV will automatically switch to standby when there is no remote control or control
panel key operation for the set amount of time.
• Record Menu (In DTV mode)
Press the ENTER/► button to enter the sub menu will appear as follows:
Schedule: This option is used to set the parameters for the recordings you want to
schedule. Press the ENTER/► button to enter the sub menu.
Press the GREEN button to set the parameters for schedule recording.
- Channel: Press the ◄/► buttons to select channel.
- Date: Press the ◄/► buttons to select date.
- Start Time: Set the start time of recording.
- Repeat: Press the ◄/► buttons to select record mode.
- Operation: Press the◄/►buttons to select Record or View.
- Record Length: Select the recording duration.
Recoder: Press ◄/► buttons to select Recoder then press ENTER to enter record.
The function is same as the hot key of
Time Shift: Press ◄/► buttons to select Time Shift then press ENTER to Time shift.
PVR File List: Shown the list of recorded programs (you can also use the INDEX
button on the remote control to access this menu). Press ▲/▼ button to select the
recorded file and press the ENTER to play.
Disk Setup: Press ◄/► buttons to select Disk setup then press ENTER to enter sub
menu, you can set the Disk.
- Select Disk: If you have multiple partitions on your disk, select the partition you wish
to use.
- Format Start: Format your USB drive.
• One-touch recording (in DTV mode only)
NOTE:
 Before you can record with this TV set (including time-shift recording), you must
have inserted a FAT32 formatted USB storage device into the USB port.
• First, insert your USB memory device into the USB port.
(RECORD).
23