Parameters Page - Bodet Harmonys 907760 Notice D'utilisation Et D'installation

4.3 Parameters page

This page allows to configure the functional features of the control box.
The information displayed is described below:
- Mode: SIGMA or Independent (see page 17).
- Sending address: address on which the Harmonys sounders listen if there is no Sigma master
The Save and Reboot button saves your configuration and reboots the control box.
22
clock (by default : 239.192.55.1). In the case of a clock presence master
clock Sigma, the latter will listen, at this address, the messages sent by the
housing buttons.