Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
I - Initial verification
Thank you for choosing a BODET control box. This product has been carefully designed for your
satisfaction based on ISO9001 quality requirements.
We recommend that you read this manual thoroughly before attempting to manipulate the product.
Keep this booklet during all the life of your product, so that you can refer to it each time it is
necessary.
Bodet cannot be held responsible for damages caused to the product due to use that does
not conform to the instructions described in this manual.
Any unauthorised modification of the product will invalidate the warranty.
1.1 Unpacking the control box
Unpack with caution and check the contents of the packaging.
907760 (control box) must contain :
■ Control box,
■ label sheet with name
■ sheet of blank label
■ This booklet,
907761 (control box extension) must contain :
■ Control box extension,
■ label sheet with name
■ sheet of blank label
■ This booklet,
1.2 Cleaning
Use an antistatic product. Never use alcohol, acetone or other solvents which may damage
product casing.
1.3 Pre-requisit
For the commissioning of the Harmonys control box, you must install the SIGMA software (supplied
on CD with your master clock) on your PC. To download the latest version of the software, contact
our export department who will send you the download links by email: export@bodet.com.
Important: to check compatibility of your equipment and the software version, please have the
version of your master clock.
Note: the Ethernet network connection to which the Bodet control box is connected must be PoE,
the power being supplied by a PoE switch or a PoE injector. Make sure that the power capacity of
your switch or injector is sufficient to power your product.
Bodet recommends the following brands:
■ PoE injectors: Zyxel, Tp link, D-Link, HP, Cisco, Axis, ITE Power Supply, PhiHong, Abus,
Globtek.
16
■ PoE switches: D-Link, HP, Planet, Zyxel, Cisco, NetGear, PhiHong.
Publicité
Table des Matières
