Bluetooth Connection - Ibiza sound DJ350LED Manuel D'utilisation

signal from USB & Bluetooth. Press again to pause.
4. PREVIOUS: Press this button to go back to previous track on USB & Bluetooth signal.
5. Next: Press this button to go to next track on USB & Bluetooth.
6. Headphone output: Connect the headphone here

Bluetooth Connection:

To play Bluetooth signal, enable the Bluetooth function on a Bluetooth device like cell phone and set the
mixer to Bluetooth input mode and then search for available Bluetooth devices nearby on cell phone. The
Bluetooth name of the mixer is "DJ350LED". Pair and connect. There is no pairing code.
Note: The DJ350LED is only discoverable when input is set to Bluetooth.
AMPLIFIER
1. Power: Press this button to power ON/OFF the unit.
2. L Volume: Use this knob to adjust the volume of left channel of main speaker output
3. R Volume: Use this knob to adjust the volume of right channel of main speaker output.
1. XLR Line input: Use the XLR connectors to connect to Line signal source to the XLR input of the amplifier.
2. RCA Line input: Use the RCA cables to connect the line signal source to the RCA line input of the amplifier.
3. 1/4" Line input: Use suitable jacks to connect the line signal source to the 1/4" line input of the amplifier.
4. SPEAKON OUTPUT: Connect the speakon outputs to the input of passive speakers.
5. MAIN Speakers output: Connect the main speaker outputs to the input of passive speakers.
Note: If there are four speakers connected to the speakon outputs and main speaker outputs, the impedance
of each speaker must be 8ohms at least to protect the amplifier.
6. Power Cord: Use the power cord provided with the amplifier to connect to the power outlet.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask
your local authorities or your dealer about the way to proceed.
4