Kenwood DNX9210BT Guide De Démarrage Rapide page 25

Removing the unit
1) Remove the hard rubber frame by
referring to step 1 in "Removing
the hard rubber frame".
2) Insert the two removal tools
(accessory3) deeply into the slots
on each side, as shown.
3) Lower the removal tool toward
the bottom, and pull out the unit
halfway while pressing towards
the inside.
NOTE
4) Pull the unit all the way out with
your hands, being careful not to
drop it.
Connector Function Guide
Pin Numbers
for ISO
Connectors
A-4
A-6
A-7
3
A-8
25
EN
Cable Color Functions
DNX9210BT