Main Specifications - Sony UP-DP10 Mode D'emploi

Main Specifications

Power supply
100 to 120 VAC (50 Hz/60 Hz)
Current consumption
1.0 Amax. at 120 VAC
Operating temperature
5 to 35 ˚C
Storage/transport temperature
–20 to 60 ˚C
Operating humidity
20 to 80 %
Maximum dimensions
208 × 303 × 71 mm
(W × H × D)
Weight Approximately 2.7 kg (main unit only)
Printing method
Four-surface sequential sublimation
thermal transfer process
(yellow, magenta, cyan, laminate)
Printing resolution
295 × 295 dpi
Printing gradations
256 gradations
(yellow, magenta, cyan)
Approximately 16.77 million colors
Number of printing pixels (maximum)
Print Pack Effective
Type printing pixels
1162 × 1765 dots
UPC-10P23
1162 × 1563 dots
UPC10P34
1162 × 1800 dots 1200 × 1800 dots
UPC10S01
Printing time
85 seconds or less
(during full printing; excludes image
transfer time)
Number of copies that can be set
1 to 25 sheets
Paper supply method
Autofeed from paper supply tray
Maximum capacity of paper supply tray
25 sheets
Paper eject method
Front ejection
Sheets are ejected in order on top of
paper supply tray
Ribbon cartridge
Inputs
Thermal head
Accessories
Supplies sold separately
Parallel Interface
Control connectors
Image transfer
pixels
1200 × 1800 dots
Data transfer method
1200 × 1600 dots
Logic level
Can print 25 sheets
AC IN (power inlet)
11.6 dots/mm
Paper supply/eject tray (1)
Power cord (1)
Stands (2)
Tray case (1)
Ink ribbon cartridge (sufficient for
printing 10 sheets) (1)
Print paper (5 sheets each of UPC-
10P23 and UPC-10P34) (1)
CD-ROM (1)
Operating Manual (1)
Software license agreement (1)
Warranty (1)
Photocard Print Pack UPC-10P23
Photocard Print Pack UPC-10P34
Glossy Photostickers Print Pack UPC-
10S01
IEEE1284-B connector (D-sub 36 pin)
Input: 5V maximum (TTL)
Output: 5V maximum (TTL)
8 bits, parallel, IEEE STD 1284-1994
compliant
• Compatible
• Reverse Nibble
• ECP
TTL
35