Cembre CS-EU Notice D'utilisation Et Entretien page 9

5. MAINTENANCE
The support trolley is robust and requires very little daily maintenance.
Compliance with the following points should help to maintain its optimum performance.
5.1) Careful cleaning
Dust, sand and dirt are a danger for any mechanical device.
Avoid putting the support trolley on muddy or dusty ground.
Every day, after use, the machine must be wiped with a clean cloth, taking care to remove any
residue, especially around the moving parts.
5.2) Maintenance intervals (braked wheels)
The wheel assemblies are of robust construction and require little maintenance, however, the fol-
lowing routine checks should be performed:
– Check support trolley wheels for signs of damage.
Check after each use.
– Keep support trolley wheels clean, removing any dirt or mud.
Carry out after each use.
– Check support trolley wheel for resistance, wheels should not be free-rotating.
Perform prior to each use.
– Check for excessive braking on wheel. Wheel should roll along track when the support trolley
is pushed, if excessive braking occurs, wheels will slide along rail.
Perform during annual check.
– Check that locknut is secure and interfaces correctly with shoulder of shaft.
Perform during annual check.
Should the support trolley exhibit signs of damage, the above points should all be checked before
it is used again.
6. RETURN TO Cembre FOR OVERHAUL
In the case of a breakdown contact our Area Agent who will advise you on the problem and give
you the necessary instructions on how to dispatch the tool to our nearest service Centre; if possible,
attach a copy of the Test Certifi cate supplied by Cembre together with the tool or fi ll in and attach
the form available in the "ASSISTANCE" section of the Cembre website.
9