Cembre CS-EU Notice D'utilisation Et Entretien page 6

Not to be used near live d.c conductor rail.
Only to be used by authorised personnel.
Not to be used for any purpose other than for the support of the Cembre NR.. impact wrenches
or SD.. sleeper drilling machines.
Do not exceed walking pace when pushing the trolley.
Do not ride on the trolley.
The user shall not modify the design or confi guration of the trolley.
1. GENERAL CHARACTERISTICS
Application range
Track gauges
Max. space dimensions
Weight without
counterweight carriage
Weight of counterweight
carriage
Weight of 3rd wheel bar
Type of wheel
Resistance between rail and
wheel:
* Version equipped with support trolley block pin.
The trolley in all possible confi gurations fulfi ls the requirements defi ned at § 5.16 "Stability" of the Norm
EN 13977:2011.
WARNING
CS-EU
CS-EU-BK*
suitable for the support of Cembre portable machines (SD...
sleeper drills and NR... impact wrenches) during operation
standard
1435 mm (4 ft 8.5 in.)
kg (lbs)
kg (lbs)
kg (lbs)
CS-EU-TA
995 to 1700 mm
Ref. page 2 fi g. 1
18 (39.6)
8,5 (18.7)
3,5 (7.7)
braked
≥1 Mega Ohm
6