BEHA UNITEST CHB 7 Mode D'emploi page 31

Resistance:
Range
400 V
4 kV
40 kV
400 kV
4 MV
40 MV
Continuity test:
Range
Diode test:
Range
Peak hold function (AC-Voltage):
(only UNITEST Clamp Meter CHB 37, only manual range selection)
Range
Resolution
0,001 V 5(3 %
4 V
40 V 0,01 V
400 V 0,1 V
600 V 1 V
Peak hold function (AC-Current):
(only UNITEST Clamp Meter CHB 37, only manual range selection)
Range
400 A
1000 A
Reaction time for peak value: < 100 ms
Warranty
UNITEST instrumtens are subject to stringent quality controls. If, in
the course of normal daily use, a fault should occur, we provide 24
months' guarantee (only valid with invoice). Faults in manufacture
and materials will be rectified by us free of charge, provided the
instrument has not been tampered with, and is returned to us
unopened. Damage due to dropping, abuse or misuse is not covered
by the guarantee. Our Service Department will repair any faults that
occur outside the guarantee period. This Instruction Manual has
been prepared with great care. No liability is accepted for the
correctness and completeness of the data, illustrations, and
drawings it contains.
BEHA reserves the right to make changes.
Resolution Accuracy
0,1 V
5(1,5%rdg+5D)
0,001 kV
5 (1,5% rdg < 0,5 V DC
0,01 kV
0,1 kV + 3 Digits)
0,001 MV
5(2%rdg+3D)
0,01 MV
Resolution
< 40 V
Resolution
0,001 V
Accuracy
rdg
+ 10 Digits)
Resolution Accuracy (50...60 Hz)
0,1 A
1 A
24 months' warranty
Open circuit voltage
Accuracy
< 0,5 V
Accuracy
5 (1,5% rdg + 2 Digits) 600 V rms
(50...60 Hz)
5 (3% rdg +10 Digits)
Overload protection
600 V rms
Overload protection
Input Impedance
app. 11 MV
app. 10 MV
Overload protection
AC 1100 A
Overload protection
600 V rms
Overload protection
DC 1100 V
AC 800 V
31