Bosch PBS 7 A Notice Originale page 16

16 | English
Apply the machine to the workpiece only
when switched on and switch the machine
off only after it has been lifted away from
the workpiece. The power tool can move sud-
denly.
Never touch the running sanding belt. Dan-
ger of injury.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Always wait until the machine has come to a
complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Safety Warnings for Stationary Opera-
tion
Wear protective gloves and never touch the
running sanding belt. Danger of injury.
Connect the machine firmly with the base
unit or the work surface, and fasten it
against movement. The power tool can move
suddenly.
The On/Off switch must be well-accessible
at all times. Switching off the machine easily
must be possible at all times.
Guide the workpiece only against the
switched-on machine and do not switch the
machine off until after having removed the
workpiece. The workpiece can move sudden-
ly.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
Intended Use
The machine is intended for dry sanding – with
high removal capacity – of wood, plastic, metal,
filler as well as varnished surfaces.
1 609 929 N18 | (29.1.08)
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Thumbwheel for belt speed preselection
(PBS 7 AE)
2 Recesses for screw clamp
3 On/Off switch
4 Lock-on button for On/Off switch
5 Dust box, complete (micro filtersystem)
6 Bolt hole
7 Adjustment screw for belt run
8 Sanding belt*
9 Holder for dust box
10 Extraction outlet
11 Latching lever for dust box
12 Filter element (micro filtersystem)
13 Clamping lever for sanding belt
14 Cover
15 Set of screw clamps*
16 Parallel and angle guide*
17 Base unit(PBS 7 AE SET)
*The accessories illustrated or described are not in-
cluded as standard delivery.
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the prod-
uct are: Sound pressure level 89 dB(A); Sound
power level 100 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
2
ty K =1.5 m/s .
The vibration emission level given in this informa-
tion sheet has been measured in accordance with
a standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with differ-
2
=2.5 m/s , Uncertain-
h
Bosch Power Tools