Cisco Linksys WRK54G Guide D'installation Rapide page 2

1
Connect the Broadband Router
A
Before you begin, make sure
that you have the setup
information for your specific
type of Internet connection.
The installation technician from
your ISP should have left this
information with you after
installing your broadband
connection. If not, you can call
your ISP to request the settings.
B
Make sure that all of your
network's hardware is powered
off, including the Router, PCs,
and cable or DSL modem.
C
Connect one end of an
Ethernet network cable to one
of the ports (labeled 1-4) on
the back of the Router, and the
other end to an Ethernet port
on a PC.
D
Repeat step C to connect
additional PCs or other network
devices to the Router.
2
C