Playing Video, Audio And Image Files - Pioneer BDP-43FD Mode D'emploi

Playback
Playing Video, Audio and Image
Files
BD-RE BD-R DVD-RW DVD-R
CD-R CD-RW USB
NOTE
• When you insert or remove a USB memory device, be sure
to turn the main power off.
• Do not disconnect the USB memory device while it is
playing.
• Files on the USB memory device cannot be played when
one of the discs below is loaded. Remove the disc.
– BDs in BDMV or BDAV format
– DVDs in VR, video or AVCHD format
– Music CDs
• For details on playable files, see "Types of Discs that Can
Be Used with This Player" (page 4) and "About Files" (page
6).
• When playing normal image files, the images are played
one at a time. With slide shows, the image switches
automatically.
1
Load the disc or connect the USB memory
device on which the image files are recorded,
then press HOME MENU to display the HOME
MENU.
 to select "Disc Navigator" (for video
2
Use
files), "Music" (for audio files) or "Photo" (for
image files), then press ENTER.
• If only a disc or only a USB memory device is loaded/
connected, proceed to step 4.
 to select "BD/DVD/CD" or "USB
3
Use
Memory Device", then press ENTER.
4
Select the file or folder.
 to select the file.
• Use
 and ENTER is
• When a folder is selected using
pressed, the files in the folder are displayed.
5
Press ENTER to play the file.
 PAUSE is pressed during playback, playback
• When
pauses. Press  PAUSE again or press  PLAY to
resume playback.
6
Press  or  to switch to the
previous or next file.
 and  REV/
• Image files are switched using
 FWD. When
RETURN is pressed, the file
selection screen reappears.
7
Press  STOP to stop playback.
NOTE
• The following functions cannot be used during playback of
audio files:
– Fast-forwarding/fast-reversing
– Repeat function
– Function control (page 19)
Selecting and playing a different
audio file during playback of an
audio file
1  to select the file.
Press
Functions
Music03.mp3
Music01.mp3
Music02.mp3
Music03.mp3
Music04.mp3
Music05.mp3
Music06.mp3
Select Enter
2
Press ENTER to start playing the file.
• The selected file is played.
Playing back Slide Show
1
Load the disc or USB memory device on which
the image files are recorded, then press HOME
MENU to display the HOME MENU.
 to select "Photo", then press
2
Press
ENTER.
• If only a disc or only a USB memory device is loaded/
connected, proceed to step 4.
3  to select "BD/DVD/CD" or "USB
Press
Memory Device", then press ENTER.
4
Select the folder.
5
Press ENTER to play the file.
 PAUSE to pause the slide show. Press
• Press
 PLAY to resume playback from where it stopped.
6
Press  STOP to stop the play at any time.
• Press RETURN to play a slide show of still images
in another folder.
Setting slide show speed/repeat
playback
1
Press YELLOW (Slide Show Menu) during the
folder selection screen.
• The setting screen for "Slide Show Speed"/"Repeat
Mode Setting" appears.
 to select "Slide Show Speed", then
2
Press
press ENTER.
Slide Show Speed
Repeat Mode Setting
Normal
• The slide show speed may be selected from "Fast",
"Normal", "Slow1" and "Slow2".
 to select the desired speed, then
3
Press
press ENTER.
4  to select "Repeat Mode Setting",
Press
then press ENTER.
Slide Show Speed
Repeat Mode Setting
Yes
No
5  to select the desired item, then
Press
press ENTER.
6
Press EXIT to exit.
17