Environmental Conditions; Qualified Personnel - HBM C16i Série Notice De Montage

22
Symbols for using advices and helpful information:
Symbol:
Means that important information about the product or its handling is being
given.
Symbol:
Meaning: CE- -Mark
The CE mark enables the manufacturer to guarantee that the product com-
plies with the requirements of the relevant EC directives (the Declaration of
Conformity can be found at http://www.hbm.com/HBMdoc).

Environmental conditions

In the context of your application, please note that all materials which release
chlorine ions will attack all grades of stainless steel and their welding seams.
In such cases the operator must take appropriate safety measures.
Conversions and modifications
The load cell must not be modified from the design or safety engineering point
of view except with our express agreement. Any modification shall exclude all
liability on our part for any damage resulting therefrom.

Qualified personnel

This load cell is only to be installed by qualified personnel strictly in accor-
dance with the technical data and with the safety rules and regulations. It is
also essential to observe the appropriate legal and safety regulations for the
application concerned. The same applies to the use of accessories.
Qualified personnel means persons entrusted with the installation, fitting,
commissioning and operation of the product who possess the appropriate
qualifications for their function.
Prevention of accidents
Although the specified breaking load in the destructive range is several times
the nominal capacity, the relevant accident prevention regulations from the
trade associations must be taken into consideration.
HBM
NOTE
C16i...
A1461--1.2 de/en/fr