Waste Disposal And Environmental Protection - HBM Z6 Série Manuel D'emploi

6

Waste disposal and environmental protection

Z6...
Waste disposal and environmental protection
nect the measurement cable for the electronics exten­
sively to the junction box and extensively to the
shielding electronics housing.
S The shield of the connection cable must not be used
for discharging potential differences within the system.
You must therefore lay sufficiently dimensioned
potential equalization lines to compensate for possible
potential differences.
Important
Potential equalization is specified for applications in
potentially explosive atmospheres.
The correct disposal of old equipment prevents ecologi­
cal damage and health hazards.
As waste disposal regulations may differ from country to
country, we ask that you contact your supplier to deter­
mine what type of disposal or recycling is legally applica­
ble in your country.
Packaging
The original HBM packaging is made from recyclable
material and can be sent for recycling. Store the packag­
ing for at least the duration of the warranty.
For ecological reasons, empty packaging should not be
returned to us.
A1027-4.1 HBM: public
17