The Controls; Switching On The Ceramic Hob; Starting A Cooking Zone - Candy PVD 603 Notice D'emploi Et D'installation

USING THE CERAMIC HOB
• After powering up the hob, wait 8 seconds to activate the electronic controls.
. Press the button
Electronic control of the hob is activated. In each display zone the heat level
displayed and the control LED blinks.
. After 10 seconds without use, the electronic control goes off and the starting
operation has to be repeated.

• STARTING A COOKING ZONE

. Press the selection button of the required cooking zone. In the display zone, the
control LED is on steady. It shows that the zone is live.
. Press the or
Press the
level is displayed.
Hold down the
gradually.
The following examples are for information only. Personal experience
should then let you adapt these settings to your taste and habits.
0 :
1 :
2 :
3 :
4 :
5 :
6 :
7 :
8 :
9 :
, for 3 seconds.
button to select a heat level between 1 and 9.
button and heat level
or button and the heat level increases or decreases
Off
)
) ..... Melting heat
Keeping hot
Heating up
Thawing, stewing, full cooking, low temperature cooking
Cooking without lid
Frying, meat browning and roasting
High temperature cooking and roasting, seizing
Frying, boiling large quantities of water.......
is displayed, press the
is
button and heat
- 45