12.6
Entering the date and time
Date and time are required for logging of the service procedures. The date and the time are printed along with the
company data on every service log.
1.
In the basic menu use the cursor keys
Short selection
Free selection
Other selections
ENTER-OK
2.
Press ENTER to confirm.
3.
Use the cursor key
4.
Press ENTER to confirm.
5.
Enter the password
8463
6.
Use the keypad and the cursor keys to enter the information.
7.
Press ENTER to confirm.
8.
Press STOP.
The standby menu is displayed.
12.7
Editing default values
The A/C service unit has preset values for the most important service tasks. The default values appear
automatically when you select the respective menu.
You can alter the following default values if necessary:
Parameter
Pressure increase test time min.
Vacuum time min.
Leak test min.
PAG oil ml. (additional quantity)
UV tracer ml.
Filling Qt. g.
Display logo?
1.
In the basic menu use the cursor keys
Short selection
Free selection
Other selections
ENTER-OK
2.
Press ENTER to confirm.
3.
Use the cursor key
4.
Press ENTER to confirm.
5.
Enter the password
7388
6.
Use the keypad and the cursor keys to enter the information.
7.
Press ENTER to confirm.
8.
Press STOP.
The standby menu is displayed.
12.8
Inserting the containers for oil and UV additive
NOTICE! Damage hazard Only use oils approved for the corresponding refrigerant. Observe the manu-
facturer's instructions.
or
to select Other selections.
to select Service.
.
or
to select Other selections.
to select Service.
.
Default value
5
20
4
0
0
500
Yes
English
11