Uberhaus 15625003 Guide De L'utilisateur page 20

Power button
1
Press this button to turn on or turn of
NOTE: When the air conditioner is turned on, it will first operate in Energy-saving
mode. In case of a power failure, the unit will maintain the setting when power
comes back on.
Mode button
2
Press the Mode button repeatedly to select the operating mode, according to the
sequence below. The matching indicator light will turn on. Please note that under
Auto mode, no indicator light will be on.
● Auto: Under this mode, the unit will operate automatically according to
factory settings. In this case, set temperature cannot be adjusted.
● Cool: Under this mode, air conditioner operates under cooling mode. Cooling
indicator will be on. Press "Fan Speed" button to adjust the fan speed.
● Energy saving:
be adjusted. The air conditioner will cycle on and off to maintain the temperature
and fan speed you set.
● Fan Only: Under this mode, air conditioner will not cool or heat, only blow
wind. Fan indicator will be on. Press "Fan Speed" button to adjust the fan
speed. (Fan speed cannot be set to Auto in this mode)
● Dry: Under this mode, the unit runs in low fan speed for dehumidification and
the corresponding indicator is on; under dry mode, the fan speed cannot be
adjusted.
Fan Speed button
3
Press the Fan Speed button repeatedly to select the fan speed according to the
sequence below. The matching indicator light will turn on.
Timer button
4
The timer can be set in 0.5 hour increments, between 1 and 10 hours; or in 1 hour
increments for 10 hours or above.
Timer ON: Set Timer ON while the unit is turned off. The air conditioner
will operate in Energy-saving mode once it turns on.
Timer OFF: Set Timer OFF while the unit is turned on. The air conditioner
will turn off once the timer is activated.
Operation Guide
Auto Cool
Under Energy saving mode, both temperature and fan speed can
Auto Low
The setting range is 0.5~24hr.
f air conditioner.
Energy Fan
saving Only
Med High
19
Dry