Publicité
Les langues disponibles
Les langues disponibles
Problems
If the pressure
indicator has risen and
nothing is
escaping through the
valve during cooking:
If steam leaks from
around the lid, check:
If you are unable to
open the lid:
If the food is not
cooked or is burned,
check:
If food has burned in
the pressure cooker:
If one of the
overpressure safety
systems is triggered:
Recommendations
This is normal during the first few minutes.
If the problem persists, place your pressure cooker
in a sink under cold running water from a tap until
the pressure indicator drops
Clean the operating valve (A)
steam release outlet (C)
the safety valve pin drops without difficulty
The correct closure of the lid.
The position of the lid seal.
The seal is correctly fitted in the lid.
The cleanliness of the lid, the seal and its groove
in the lid.
The rim of the pan is in good condition and not
damaged.
Check that the pressure indicator is in the lowered
position.
Otherwise, place your pressure cooker in a sink under
cold running water from a tap until the pressure
indicator drops
- fig.
Never interfere with the pressure indicator.
The cooking time.
The power of the heat source.
The correct position of the operating valve.
The quantity of liquid.
Leave the pan to soak before cleaning it.
Never use bleach or products containing chlorine.
Turn off the heat source.
Let the pressure cooker cool down without moving it.
Wait for the pressure indicator to drop and open
the pressure cooker. (refer to section "Opening ").
Check and clean the operating valve, the steam
outlet, the safety valve and the seal.
If the problem persists, contact the Customer
Relations Helpline - see contact list.
- fig.
13.
- fig. 15
- fig. 16
and check that
13.
EN
and the
- fig.
17.
13
Publicité
