Festool SYSLITE DUO Notice D'utilisation page 11

Contents
1 Symbols..................................................... 11
2 Safety warnings.........................................11
3 Intended use..............................................12
4 Technical data........................................... 12
5 Machine features...................................... 12
6 Commissioning..........................................12
7 Setup..........................................................12
8 Affixing to surfaces [4].............................. 13
9 Set up with tripod [5]................................. 13
10 Suspend.....................................................13
11 Service and maintenance..........................13
12 Environment.............................................. 13
13 General information.................................. 13
1 Symbols
Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
CAUTION! Do not look directly into the
light beam!
Minimum distance to illuminated sur­
0,2m
faces or flammable materials
Device suitable for "harsh operating
conditions" in accordance DIN EN
60598.
Minimum load capacity of the suspen­
sion rope.
min.
15 kg
Do not dispose of it with domestic
waste.
Handling instruction
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
UKCA marking: The United Kingdom
Conformity Assessed symbol is a
marking for products being placed on
the market in the United Kingdom. It is
a manufacturers indication that the
product is in conformance with the rel­
evant regulations in the UK.
2 Safety warnings
WARNING! Read and observe all infor­
mation and safety instructions. Failure to
observe the information and safety instructions
may lead to electric shocks, fires and/or seri­
ous injuries.
Keep all safety information and instructions
for future reference.
Only for AS/NZS: The tool shall always be
-
supplied via residual current device with a
rated residual current of 30 mA or less.
Handle the device with care. The device
-
may generate heat which increases the risk
of fire and explosions.
Never use the device in potentially explo­
-
sive environments.
- Do not cover the device when switched on.
The device heats up during operation and
can cause burns.
Warning of harmful light radiation.
-
Do not look into the light beam for long
periods. Do not direct the light beam to­
wards other people or animals. In accord­
ance with DIN EN 62471, the device is safe
in most conditions of use, except in cases
of exceptionally long exposure and direct
eye exposure to the light beam.
Have your device repaired by qualified
-
specialist staff and always use original
spare parts.
-
in this device must only be replaced by the
manufacturer or a customer service work­
shop in order to ensure that your device op­
erates reliably.
- Check the mains plug and the power cable
regularly in order to prevent a hazard.
Disconnect any damaged power cables
from the power supply immediately and
have them replaced by an authorised serv­
ice workshop.
- Make sure that the device is in a stable po­
sition or suspended securely when setting
it up. The device could fall. There is a risk
of injury.
- Do not continue to use the device if it is
damaged.
English
The light source fitted
11