Configuring The Remote Control - Berbel BFB 6bT Manuel D'utilisation

Operation
Button
Reset hours counter
The control indicator for changing
the filter filling blinks every 1000 fan
operating hours. A reset can be used
to reset the hours counter to zero.
☞ Hold the button (> 1 second).
The counter restarts.
The buttons 1, 2, 3 and P flash quickly,
configuration mode is exited.
Button
Automatic run-on.
As delivered, the function is turned on.
☞ Touch the button one time.
Button glows brightly:
Automatic run-on is activated.
☞ Touch the button one time.
Button flashes:
Automatic run-on is deactivated.
6005229_0 – 08.09.2020
3.5

Configuring the remote control

If required, certain functions of the
remote controls may be set up as follows.
Button
Start automatic connection to the
extractor hood.
☞ Touch the buttons once for longer
than 3 seconds.
Button
Disconnect from the extractor hood.
☞ Touch the buttons once for longer
than 3 seconds.
Button
Reset remote control to factory settings.
☞ Touch the buttons once for longer
than 3 seconds.
+
+
+
137