Button Function - Berbel BFB 6bT Manuel D'utilisation

Operation
The battery is fully charged upon delivery,
but before it is used for the first time, it
must be activated with a short charging
process. The device is only ready for
operation at this point.
☞ Charge the battery for one second.
D "3.3 Charging the battery"
(page 135).
The remote control has a range of up
to 5 m.
Touching a button executes the
corresponding function. The function is
confirmed:
y The remote control vibrates.
y The LED illuminates for a short time.
y The button lights up.
Button Function
ON / OFF
Power level 1
Power level 2
Power level 3
POWER level
6005229_0 – 08.09.2020
1
Button Function
Hob lighting
Synchronisation
Recirculated air mode,
filter filling indicator
"Raise" function
Effect lighting
Multifunction button
(e.g. for ceiling connection
with effect lighting)
Run-on function
"Lower" function
Whether the function can be executed
1
is dependent on the extractor hood.
If the battery indication illuminates red
when a key is pressed, the battery must
be charged.
D "3.3 Charging the battery"
(page 135).
1
1
1
1
1
1
1
1
121