Berbel BFB 6bT Manuel D'utilisation page 123

Operation
Extractor hoods with control panel "V8"
The extractor hood must be connected
with the "ConInterface" device.
☞ Press and hold both buttons at the
same time (> 3 seconds) to start
the connection process.
Both buttons flash for 2 minutes.
6005229_0 – 08.09.2020
Extractor hoods with control panel "V7"
The extractor hood must be connected
with the "ConInterface" device.
☞ Press and hold both buttons at the
same time (> 3 seconds) to start
the connection process.
Both buttons flash for 2 minutes.
The remote control and extractor hood
are now connected by radio.
123