Ceiling Connection - Berbel BFB 6bT Manuel D'utilisation

Operation
3.2.8 Ceiling connection with
effect lighting
If the extractor hood is equipped with a
ceiling connection with effect lighting,
the lighting may be controlled as follows.
Dimmer
Button
☞ Press the button 1x, in order to
switch the effect lighting from the
ceiling connection on or off.
☞ Hold button (> 1 sec.) to start the
dimmer. After releasing the button,
the effect lighting remains at the
selected brightness.
After switching off, the effect lighting
starts with full brightness the next
time it is switched on.
130
Colour temperature
Button
☞ Touch the button 1x.
☞ Touch and hold the button again
within half a second to start the
colour cycle.
The effect lighting from the ceiling
connection switches on, the colour
cycle starts.
☞ Release the button when the
desired colour temperature is
reached.
The colour cycle stops, and the
selected colour temperature is saved.
The colour temperature can be
synchronised.
D "3.2.9 Synchronisation" (page 131).
6005229_0 – 08.09.2020