Synchronisation - Berbel BFB 6bT Manuel D'utilisation

Operation
3.2.9

Synchronisation

If the extractor hood or a ceiling
connection is equipped with effect
lighting, the lighting can be synchronised
with the hob lighting.
Switching on/off
Requirement:
y All light sources of the extractor
hood are switched off.
Button
☞ Hold the button (> 1 second).
y All light sources switch on at the
same time with full brightness.
☞ Hold the button again
(> 1 second).
y All light sources switch off at the
same time.
6005229_0 – 08.09.2020
Dimmer
Requirement:
y Hob lighting is switched on and
dimmed.
D "3.2.6 Hob lighting" (page 128).
Button
☞ Hold the button (> 1 second).
y All light sources of the extractor
hood are switched on.
y The dimming values are
synchronised.
After switching off, all lighting starts
with full brightness the next time it is
switched on.
131