Metabo HPT C 3607DWA Instructions De Sécurité Et Mode D'emploi page 14

English
2. Battery Charger
Model
Input power source
Charging time
(At a temperature of 68°F (20°C))
Charging voltage
Charging current
Weight
NOTE: The charging time may vary according to temperature and power source voltage.
3. AC/DC Adapter
Model
Input power source
Output voltage
Operating temperature range
Weight
Electronic control
○ Soft-start
○ Overload protection
This protection feature cuts off the power to the motor
in the event of overloading of motor or a conspicuous
reduction in rotational speed during operation.
When the overload protection feature has been
activated, the motor may stop.
In this case, release the tool switch and eliminate
causes of overloading.
After that you can use it again.
○ Overheat protection
This protection feature cuts off the power to the motor
and stops the power tool in the event of overheating of
motor during operation.
When the overheat protection feature has been
activated, the motor may stop.
In this case, release the tool switch and cool it down in
a few minutes.
After that you can use it again.
14
00Book̲C3607DWA̲NA.indb 14 00Book̲C3607DWA̲NA.indb 14
UC18YSL3
Single phase: AC 120 V 60 Hz
BSL36B18 : Approx. 52 min
DC 14.4–18 V
DC 8.0 A
1.3 lbs. (0.6 kg)
ET36A
Single phase: AC 120 V 60 Hz
36 V
14°F (-10°C)–104°F (40°C)
Adapter : 1.8 lbs. (0.8 kg)
Box : 2.6 lbs. (1.2 kg)
2021/06/10 16:51:42 2021/06/10 16:51:42