Stiga SHT 48 AE Manuel D'utilisation page 67

5
EN
3. TECHNICAL DATA
Voltage
No load speed
Blade speed
Blade length
Cutting capacity
Weight with battery pack
Measuered sound pressure level
Measurerd uncertainly
Guaranteed sound power level
Measurerd uncertainly
Vibration
4. DESCRIPTION
1. Blade cover
2. Blade
3. Guard
4. Sensor switch
5. Front handle
6. Battery pack
7. Trigger lock button
8. Trigger
9. Rotate button
The example of the conformity declaration is found in the penultimate page of the manual.
5. OPERATION
For complete charging instructions, refer to the perator's
Manuals for your battery pack and charger models.
NOTE: To avoid serious personal injury, always remove
the battery pack and keep hands clear of the lock-out
button when carrying or transporting the tool.
INSTALL BATTERY PACK See Figure 2.
■ Place the battery pack in the hedge trimmer. Align
raised rib on battery pack with groove in hedge
trimmer.
■ Make sure the latch on the battery pack snaps in
place and that battery pack is secured in hedge
trimmer bofore beginning operation.
43.2 Volt DC
1600/min
3200spm
610 mm
20 mm
2.7 KG
L =86 dB(A)
PA
3 dB(A)
L =99 dB(A)
WA
3 dB(A)
2 m/s 2
10. Model label
10.1 CE mark .....
10.2 Name and address of Manufacturer
10.3 ACoustic power leve according to .....
10.4 Article code 10.5 Type code
10.6 Model name 10.7 Serial number
10.8 Year of manufacture
REMOVE BATTERY PACK See Figure 2.
■ Locate the latch on the battery pack and depress to
release the battery pack from the hedge trimmer.
When placing battery pack in your hedge trimmer, be
sure raised rib on battery pack aligns with groove in
hedge trimmer and latch snaps in place properly.
Improper assembly of battery pack can cause
damage to internal componets.
STARTING THE HEDGE TRIMMER See Figure 3.
■ Remove the blade cover.
■ For added safety, there is a micro switch in the
fronthandle. When operating, hold the trimmer with
CAUTION