Sony SU-RS51U Mode D'emploi page 5

3
Attach the two protectors with
the four screws (supplied).
SXRD Projection TV 60"
4
Place the TV.
Aligning the front corners of the TV pedestal
with the inner sides of the stand, place the TV
with the feet on the TV pedestal's base in the
stoppers.
Stoppers
Notes
• Be sure at least three people carry the TV.
• Hold the TV in the manner specified in the
operating instructions of the TV.
• Avoid placing the TV on the raised side portions of
the stand's top panel or giving any strong shock to
the stand.
• Make sure that the feet on the TV pedestal's base
are properly seated in the stoppers.
SXRD Projection TV 70"
Protector
Screw
The illustration shows the SXRD
Projection TV 70".
Feet
5
Attach the top front cover.
For the 60" model only
Stick the two cushions on the inner side of the
top front cover.
CAUTION
Be careful not to pinch your fingers when
attaching the top front cover.
Note
Insert the top front cover until it clicks into place.
6
Secure the top front cover with
three screws.
Note
Secure the screws at the centre first.
Cushion
(Continued)
5
(GB)