Before Use; Safety Instructions - Briteq Club Lasser 7 Mk2 Mode D'emploi

ENGLISH
OPERATION MANUAL
®
Thank you for buying this Briteq product. To take full advantage of all possibilities and for your own safety,
please read these operating instructions very carefully before you start using this unit.
FEATURES
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
 This device was designed to produce decorative effect lighting and is used in light show systems.
 A superb seven color club laser equipped with 3 powerful, temperature controlled lasers:
o 350mW Red laser (650nm)
o 60mW Green laser (532nm)
o 50mW Blue laser (473nm)
 Thanks to 20kHz scanners the "Club laser7 Mk2" projects rock steady sharp images containing up to
7colors!
 100% ILDA compatible for full flexibility!
 Comes with adapted flight case included!
 The 5 user modes make this laser very easy to use:
o MUSIC CONTROL: 100% plug & play  just connect the laser to the mains to start an incredible,
music controlled, laser show based on the 128 internal patterns! Perfect for hiring companies!!!
o MASTER/SLAVE mode: Several units can be used in completely synchronized music mode: amazing
and very simple to use!
o AUTOMATIC mode: all internal programs will be shown automatically, no music needed
o DMX mode, two options possible:
o 1 channel for extremely easy setup and use!
17 channels to take full control of all internal programs!
o
o ILDA mode: connect the laser to any PC with ILDA-compatible interface and use any professional
laser software to create stunning laser shows, create logos, etc.
 Laser projections can be adapted to the size of the venue with X/Y image zoom controls
 Graphics can be mirrored for projections behind a transparent screen
 Blanking technology for nice separate beams
 Perfect for use in clubs, discotheques, publicity, exhibitions, and many more ...
 Complies to EN/IEC 60825-1 ED2, 2007-03 for Laser Safety

BEFORE USE

 Before you start using this unit, please check if there's no transportation damage. Should there be any, do
not use the device and consult your dealer first.
 Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
 Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
Check the contents:
Check that the carton contains the following items:
 CLUB LASER7 Mk2
 dB25/dB25 ILDA cable
 Flight case
 2 keys (for key switch)
 Mains cable
 Operating instructions
 Cable connector for remote interlock
BRITEQ
®
USER MANUAL
1/70 CLUB LASER 7 Mk2
ENGLISH

SAFETY INSTRUCTIONS:

CAUTION: To reduce the risk of electric shock, do not remove the top cover.
CAUTION
No user-serviceable parts inside. Refer servicing to qualified service
personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use
or the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence of
important operation and maintenance (servicing) instructions in the literature accompanying this
appliance.
This symbol means: indoor use only.
This symbol means: Read instructions.
This symbol determines: the minimum distance from lighted objects. The minimum distance between
light-output and the illuminated surface must be more than 1 meter.
 To protect the environment, please try to recycle the packing material as much as possible.
 A new light effect sometimes causes some unwanted smoke and/or smell. This is normal and disappears
after some minutes.
 To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
 To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when
bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full
performance or may even cause damages.
 This unit is for indoor use only.
 Don't place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign
object enters the unit, immediately disconnect the mains power.
 Locate the fixture in a well ventilated spot, away from any flammable materials and/or liquids. The fixture
must be fixed at least 50cm from surrounding walls.
 Don't cover any ventilation openings as this may result in overheating.
 Prevent use in dusty environments and clean the unit regularly.
 Keep the unit away from children.
 Inexperienced persons should not operate this device.
 Maximum save ambient temperature is 40°C. Don't use this unit at higher ambient temperatures.
 Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
 Allow the device about 10 minutes to cool down before servicing.
 Always unplug the unit when it is not used for a longer time or before replacing the bulb or start servicing.
 The electrical installation should be carried out by qualified personal only, according to the regulations for
electrical and mechanical safety in your country.
 Check that the available voltage is not higher than the one stated on the rear panel of the unit.
 The power cord should always be in perfect condition. Switch the unit immediately off when the power cord
is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
 Never let the power-cord come into contact with other cables!
 This fixture must be earthed to in order comply with safety regulations.
 Don't connect the unit to any dimmer pack.
 Always use an appropriate and certified safety cable when installing the unit.
 In order to prevent electric shock, do not open the cover. Apart from the lamp and mains fuse there are no
user serviceable parts inside.
 Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same
type and electrical specifications!
 In the event of serious operating problems, stop using the fixture and contact your dealer immediately.
 The housing and the lenses must be replaced if they are visibly damaged.
 Please use the original packing when the device is to be transported.
 Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
Important: Never look directly into the light source! Don't use the effect in the presence of persons suffering
from epilepsy.
BRITEQ
®
USER MANUAL
2/70 CLUB LASER 7 Mk2