Removal Of The Blower - deville C07931 Notice D'installation Et D'utilisation

10.4 – Removal of the blower
•
To remove the blower unit, proceed in the order
indicated below (Fig. 28), after having cleared
access to it and powered it off.
1) Remove the door by lifting it clear of its hinges
and store it carefully.
2) Remove the frame unit (4 screws).
3) Remove the command button by pulling it off.
4) Remove the
disconnecting the 2 wires from the On/Off
button.
5) Remove the casing (1 screw).
6) Remove the blower unit (4 screws).
To refit, proceed in reverse order.
façade (2 screws) by
21