Publicité
Les langues disponibles
Les langues disponibles
corresponding opening on the opposite side of the bracket.
–
Remove the bracket 7 and replace it with the holding bracket 2 with its hinge bolt.
–
Now install the holding bracket 7 in the previous position of the bracket 2.
–
Place the freezer door onto the hinge bolt on holding bracket 2.
Caution: Support the door.
–
Re-insert the hinge bolt of the bracket 6 into the freezer door.
–
Fit the four covers C over the bracket and the openings.
–
Take out the cover 10 from the lower panel 1 and replace it on the opposite side.
–
Replace the panel 1 on the appliance.
–
Remove the screw covering caps a and the sealing plugs b.
–
Take out the screws holding the door handle. Fit the handle on the opposite side, using the fixing
screws to secure it. Push the sealing plugs into the now empty openings in the door and replace
the covering caps on the screw heads.
If the unit has been tilted to more than 30°, wait for about 4 hours before re-connecting it to the
mains.
Temperature control
The unit is re-activated by connecting it to the mains. It is only switched off completely when the
plug is removed from the wall socket.
The temperature in the refrigerator cabinet can be adjusted by setting the temperature control.
Turning the control clockwise will decrease the temperature, while turning it anti-clockwise will
20
Publicité
